Using Traditional Mode - Konica Minolta bizhub C220 System Administrator Manual

Printer Information
You can open the KONICA MINOLTA PAGE SCOPE Web Connection from the Device
Selector, and check the device status from a Web browser. The procedure for checking
the Printer Information is as follows.
• Select a device from the Network Search or History view, and click Printer Information.
(The Printer Information can be found in the expanded area that appears when you
click Details.)
• From the History view, right click on the device whose information you want to check,
and select Printer Information from the context menu.
If a third-party device has the similar function to the KONICA MINOLTA PAGE SCOPE
Web Connection, then you can also check its information using Printer Information.

4.3 using traditional modE

This section describes how to print in Traditional Mode. In Traditional Mode, use the
Device Selector to create a printer icon for the device you want to use, and then you use
that printer icon to print.
Creating a Printer Icon
First, a user with Administrator privileges creates a printer icon. The procedure is as
follows.
1. Open the Print Setup dialog box from "KONICA MINOLTA Universal PCL (PS)" in the
Printers folder, o, and launch the Device Selector.
2. Using either History, Network Search, or Manual Connection, select the device for
which you want to create an icon. (See section 4.2)
3. Click Create Printer Icon at the lower left of the Device Selector dialog box.
Figure 4-3-1 Create Printer Icon
4. Using the Universal Print Driver
39