Konica Minolta bizhub C220 System Administrator Manual page 35

3. Select "Manual Connection" from the pull-down list at the top of the Device Selector
dialog box.
Figure 4-2-6 Example of Manual Connection View
4. Select the child driver to use from the list on the left of the dialog box.
5. Specify the connection in the right-hand side of the dialog box. There are three ways to
specify the connection, as shown below.
• IP Address/Host Name
You can specify the connection by entering the IPv4 address, IPv6 address, or
host name directly. Fully Qualified Domain Names (FQDN) cannot be used, and
up to 48 characters can be entered.
• PortSpecify the output device by the port registered with the operating
system.
• Shared Printer
Specify the output device by entering the path to a shared printer
(e.g. "//server/printer"). Up to 239 characters can be entered. You can also
click Browse to specify it while browsing for a shared printer.
The Browse button is not supported in Windows 7 (Server 2008 R2) and
note:
later operating systems.
4. Using the Universal Print Driver
31