Adding New Konica Minolta Mfps To Your Installation - Konica Minolta bizhub C220 System Administrator Manual

3. Install and Uninstall of the UPD
Please note, however, that the less functionality will be available than the printer driver
that is included on the software CD-ROM. For this reason, some models provide updated
versions of UPD, or individual child drivers for these models via update packages.
An update package is a method to provide child drivers of new products. For details of
update packages are described in the following section.

3.4 adding nEw Konica minolta mFps to your installation

You can use an update package to add new child drivers without uninstalling the UPD
version you are currently using, or without deleting your printer icons created using UPD.
Update packages are available from the KONICA MINOLTA website in the same way as
other printer drivers.
Update Packages
22
• The purpose of this package is to add and update child drivers to the existing
UPD already installed on your computer.
• The supported operating systems are the same as the UPD to be updated.
• It may be necessary to restart the computer when updating, depending on the
contents of the update. A warning will appear when performing the update if a
restart is required.
• After an update, the version of UPD will be upgraded. Check the procedure in
section 4.4.
• The UPD versions supported for update are defined for each update package,
and only supported versions can be updated. In general, UPD versions that
were released after the update package cannot be updated.
• The user must have Administrator privileges in order to perform the update.
• When you perform an update, UPD must have been installed successfully. The
update cannot be performed if some of the installed UPD configuration files
are missing.
• We recommend using an update package with the same UI language as the
installed UPD. Although it is possible to update with a different UI language,
all of the UI text will not be changed after the update. If you change the UI
language, please first uninstall UPD, and then install the UPD version with the
desired UI language.