Konica Minolta bizhub C220 System Administrator Manual page 31

4. Using the Universal Print Driver
4.2 using dynamic modE
This section describes how to print in Dynamic Mode. In Dynamic Mode, you can select
devices using one of three methods: Network Search, Manual Connection, and History.
Dynamic Mode is not available to restricted users (e.g. with "User" privileges).
Network Search
Use Network Search to search for devices on the network, and select one of the
matching devices that are found. The procedure for using Network Search is as follows.
1. From the Windows Printers folder, right click on the "KONICA MINOLTA Universal
PCL(PS)" icon, and select Print Setup.
2. The KONICA MINOLTA Universal Printer Driver Device Selector opens.
3. Select "Network Search" from the pull-down list at the top of the Device Selector
dialog box.
note:
If there is no history data such as when you first open the Device Selector, "Network
Search" will be selected automatically by default.
Figure 4-2-1 Network Search Selection
4. The Device Selector starts to search the network for devices.
note:
Click Cancel at the bottom of the dialog box below to cancel the search.
Figure 4-2-2 Searching Dialog Box
27