Use Point & Print - Konica Minolta bizhub C220 System Administrator Manual

3.2 usE point & print
You can share using Point & Print with KONICA MINOLTA Universal Printer Driver. Follow
the steps below to print using Point & Print.
1. Install UPD on your server, and then create a printer icon in Traditional Mode. (See
section 4.3 for details.)
2. Configure the printer icon you created for sharing.
3. From a client PC, access the shared printer icon on the server, and download and
install it.
4. Print using the installed child driver.
notE:
We do not recommend sharing via Dynamic Mode, and accessing it from a client.
Although it is also possible to print using Dynamic Mode, it will not be possible to open the
Device Selector dialog box on the client computer, so the device that was last connected
to the server will perform the printing. (See Chapter 4 for details about Dynamic Mode and
Traditional Mode.)
Updating UPD in Point & Print Environment
If you wish to delete an older version of UPD and install a new version in the Point & Print
environment, then in order to delete UPD completely, you must delete UPD on the server, and
also delete the shared printer drivers installed on the client PC. The procedure is as follows.
Method 1: Using the uninstaller
1. On the client PC, execute the following file from the UPD installation package.
• UPDSetup.exe (for 32-bit environments)
• UPDSetup64.exe (for 64-bit environments)
2. Check the Software End User License Agreement, and if there are no problems, click
Agree.
3. Install and Uninstall of the UPD
19