Monitor - Aiphone IS SERIES Operation Manual

■ Monitor

Display item examples
List of stations, zones and/or remote sites (→P. 29)
The list of the stations, zones and/or remote sites you searched for is
shown here. Stations, zones and/or remote sites are displayed either by
number and/or name depending on the setting on the "INITIAL SETTING".
* "NOT AVAILABLE" appears in the list when a corresponding station,
zone or remote site is not detected.
List page no. (→P. 16)
When the list of stations, zones and/or remote sites, or setting
items consists of two or more pages, the current page no. is
shown here.
Information display (→"USING THE SYSTEM")
Displays the name (or number) of selected or calling station,
operation method, etc.
Function buttons
The function buttons are also enabled when the
function indicators just above the buttons are
displayed.
* The function name on an indicator may differ
from the name of the corresponding button. In
that case, the button operates as the function
of the indicator.
Function indicators
The indicators differ depending on the
display mode.
* These are not touch panel keys.
NOTE:
The above display example differs from the actual one.
Status display icons
The following icons are displayed here depending on the status of the
master station.
* The color of an icon changes according to the priority level.
Normal: green
Priority: yellow
Urgent: red
Icons The status when the icon appears
Appears while talking to the target station, being called
from another master station, etc.
Appears while being called.
Appears when paging.
Appears when the image on the monitor is adjusted by
pressing the ADJUST button.
Appears while the door release is activated by pressing
the door release button.
Appears when the microphone volume is set to OFF, or
the PRIVACY function is activated.
Appears while transferring is suspended.
Appears while receiving a call from a station transferred
by another one.
* This icon also appears on the station that performs
transferring.
Appears while searching for a station, zone or remote
site.
Appears while monitoring.
Appears during scan-monitoring.
Appears when an error message is displayed.
Appears when a setting screen is displayed.
Appears when the microphone volume is set to ON.
Shows it is a waiting time for shifting to the next
performance, etc.
7