Monitor Settings - Aiphone IX Series Operation Manual

4
Settings and Adjustments

Monitor Settings

Configure settings related to monitoring and scan monitoring.
Scan monitoring: This function automatically switches monitoring between multiple stations and network cameras
(other than VoIP phones) for a certain interval.
1.
Tap [Monitor] on the Settings (1/2) screen.
• The Monitor Settings screen will be shown.
2.
Configure the settings.
3.
Tap [Back].
• The settings will be saved.
Entry
MONITOR TIMER
SCAN MONITOR
DWELL TIME
Scan Monitor Settings
Description
Set the monitoring timer by station. Scan
Monitor must be end manually.
Set the dwell time to change destination for
scan monitor.
Configure the stations and network cameras
to perform scan monitoring.
Refer to "How to configure Scan Monitoring
(→page 127)" for information on how to
configure this.
Configuring on the station
Settings
• 10 - 600 sec: Configure
between 10 and 600 sec
(by 1 sec).
• ∞ (infinite): No timeout.
• 5 sec
• 10 sec
• 30 sec
-
126
Default values
60 sec
5 sec
-