Outline Of Operations - Aiphone IS SERIES Operation Manual

OUTLINE OF OPERATIONS

This manual mainly describes the following operations.
Operations you can do within a site (communication, transferring, paging, monitoring, door release, etc.)
•
Operations you can do between sites (communication, transferring, paging, door release, etc.)
•
Site 2
Network direct system
LAN (IP network)
IP
IP
Building A
Communication, transferring, Communication, transferring,
paging, monitoring, door paging, monitoring, door
release, etc. release, etc.
NOTES:
•
The arrows in the fi gure above show examples of operations.
•
For operating a PC master station (IS-SOFT), refer to the "OPERATION MANUAL" for the PC master station.
•
The term "a remote site" used in this manual means "a network direct system in a remote site".
•
You can communicate with the pilot station or page the pilot zone registered in a remote site. You cannot select a desired station or zone in a
remote site.
•
Depending on the system confi guration of a remote site, some operations to the site may be disabled.
•
A call or talk may not be possible when the communication path is fully occupied.
•
Video images at the target video door station may not appear on the monitor when the video path is fully occupied even though a call or talk is
possible.
10
Site 1
IP
Internet / WAN
Communication, Communication,
transferring, transferring,
paging, door paging, door
release, etc. release, etc.
IP
: Control offi ce, etc.
Site 3
Network direct system
IP
Communication, Communication,
transferring, transferring,
paging, door paging, door
release, etc. release, etc.
The pilot station or zone
that receives a call, paging,
etc. from a remote site.
Site 32
LAN (IP network)
IP IP
Building B
IP IP unit