Table of Contents
Advertisement
S 48 = 128
The following chart lists the S36 and S48 configuration settings necessary to negoti-
ate certain types of connections:
S36 = 0, 2
S36 = 1, 3
S36 = 4, 6
S36 = 5, 7
S89
Range:
Default:
This command displays the number of seconds of inactivity (no characters sent from
the DTE, no RING) in the off-line command state before the modem places itself
into standby mode. A value of zero prevents standby mode.
If a number between 1 and 4 is entered for this register, it will set the value to 5, and
the inactivity before standby will be 5 seconds. This is done for compatibility with
previous products which allowed time-outs down to 1s.
S90
0 = local phone on-hook
1 = local phone off-hook
This register tells the status of the local phone. It is read only.
S91
Range:
Default:
Units:
This register is effective only for Japan. It specifies the line transmit level in dB with
an implied minus sign.
Negotiation disabled; forces immediate fallback options
specified in S36.
S48=7
LAPM or hangup
LAPM or async
LPAM, MNP, or hangup
LAPM, MNP, or async
Timer to Control Sleep Mode
0, 5-255
10
Local Phone Status
Line Transmit Level
6-15
15
1 dB
74
S48 =128
do not use
async
MNP or hangup
MNP or async
Advertisement
Table of Contents
