Table of Contents
Advertisement
S38
There are 2 S-registers which support K56flex connections. S38 sets the maximum
56K downstream speed that the modem attempts to connect. To disable K56flex, set
S38 to 0. The S37 register is used to control the upstream V.34 rate. (ref. V.34 Data/
Fax Document). Use the S109 register to control V.90 connections.
S38 = 0
S38 = 1
S38 = 2
S38 = 3
S38 = 4
S38 = 5
S38 = 6
S38 = 7
S38 = 8
S38 = 9
S38 = 10
S38 = 11
S38 = 12
S38 = 13
S38 = 14
S42
0 = auto rate disabled, 1 = enabled.
Range:
Default:
This command is used for testing and debugging only. V.32bis and V.22bis auto rate
is disabled. Retrain operation is disabled or enabled in data mode, and fallback is
disabled in data mode.
S43
0 = auto mode disabled, 1 = enabled
Range:
Default:
This command is used for testing and debugging only. V.32bis startup auto mode
operation is disabled.
S48
S48 = 7
56K Dial Line Rate (default 1)
K56flex disabled - V.34 connection (see S37)
K56flex autorate - maximum achievable connection
32000 bits / s
34000 bits / s
36000 bits / s
38000 bits / s
40000 bits / s
42000 bits / s
44000 bits / s
46000 bits / s
48000 bits / s
50000 bits / s
52000 bits / s
54000 bits / s
56000 bits / s
Auto Rate (default 1, range 0-1)
0-1
1
Auto Mode (default 1, range 0-1)
0-1
1
LAPM Error Control and Feature Negotiation (default 7)
Negotiation enabled.
73
Advertisement
Table of Contents
