Table of Contents
Advertisement
On
Result Codes:
P
This command configures the modem for pulse (non-touch-tone) dialing. Dialed
digits are pulsed until a T command or dial modifier is received. Tone dial is the
default setting.
Qn
Result codes are informational messages sent from the modem and displayed on your
monitor. Basic result codes are OK, CONNECT, RING, NO CARRIER, and ER-
ROR. The ATQ command allows the user to turn result codes on or off.
Result Codes:
Return On-line to Data Mode
Select Pulse Dialing
Result Code Control
46
Advertisement
Table of Contents
