ActionTec 56K PCI Pro User Manual page 72

S24
Range: 0, 5-255
Default: 10
This command displays the number of seconds of inactivity (no characters sent from
the DTE, no RING) in the off-line command state before the modem places itself
into standby mode. A value of zero prevents standby mode.
If a number between 1 and 4 is entered for this register, it will set the value to 5, and
the inactivity before standby will be 5 seconds. This is done for compatibility with
previous products which allowed time-outs down to 1s.
S28
0 = disabled, 1-255 = enabled,
Range: 0-255
Default: 1
This register enables/disables V.34 modulation.
S30
Range: 0-255
Default: 0
Units:
S30 specifies the length of time (in minutes) that the modem will wait before discon-
necting when no data is sent or received. This function is only applicable to buffer
mode.
S32
Range: 0-255
Default: 10
This register specifies a synthetic ring volume in dB with an implied minus sign.
S33
Range: 0-5
Default: 0
This register specifies a synthetic ring frequency. Valid ranges are 0-5, with 0= dis-
abled and 1-5 corresponding to 5 ring frequencies.
Timer to Control Sleep Mode
V.34 Modulation Enable/Disable
Inactivity Timer
minutes
Synthetic Ring Volume
Synthetic Ring Frequency
71