ActionTec 56K PCI Pro User Manual page 57

56k v.90 pci voice/fax windows modem

Table of Contents

&Wn

This command stores certain command options and S-register values into the modem's

nonvolatile memory. The ATZ command or a powerup reset of the modem restores

this profile.

Result Codes:

&Yn

This command does not change the behavior of the modem but is included for com-

patibility with applications that issue the &Y0 command:

Result Codes:

&Zn=x

This command is used to store up to four dialing strings in the modem's nonvolatile

memory for later dialing. The format for the command is &Zn = "stored number"

where n is the location 0?3 to which the number should be written. The dial string

may contain up to 40 characters. The ATDS = n command dials using the string

stored in location n.

Result Codes:

Store Current Configuration

Select Stored Profile for Hard Reset

Store Telephone Number

Table of Contents