S35
0 = disabled, 1 = enableD
Range: 0-1
Default: 0
Data Calling Tone is a tone of certain frequency and cadence as specified in V.25
which allows remote Data/FAX/Voice discrimination. The frequency is 1300 Hz with
a cadence of .5 s on and 2 s off.
S36
This register specifies the action to take in the event of negotiation failure when error
control is selected.
S36 = 0, 2
S36 = 1, 3
S36 = 4, 6
S36 = 5, 7
S37
S37 = 0
S37 = 1
S37 = 2
S37 = 3
S37 = 4
S37 = 5
S37 = 6
S37 = 7
S37 = 8
S37 = 9
S37 = 10
S37 = 11
S37 = 12
S37 = 13
S37 = 14
S37 = 15
S37 = 16
S37 = 17
S37 = 18
S37 = 19
Data Calling Tone
Negotiation Fallback (default 7)
Hang up.
Fall back to an asynchronous connection.
Attempt MNP. If MNP fails, hang up.
Attempt MNP. If MNP fails, fall back to asynchronous
connection.
Dial Line Rate (default 0)
maximum modem speed
reserved
1200 bits/s and 75 bits/s
300 bits/s
reserved
1200 bits/s
2400 bits/s
4800 bits/s
7200 bits/s
9600 bits/s
12000 bits/s
14400 bits/s
16800 bits/s
19200 bits/s
21600 bits/s
24000 bits/s
26400 bits/s
28800 bits/s
31200 bits/s
33600 bits/s
72