ActionTec 56K PCI Pro User Manual page 71

S14
Indicates the status of command options. Only bit 2 and bit 5 are used, read only.
Bit 3
Bit 6
Default: 8 (00001000b)
S21
Indicates the status of command options. Only bits 3, 4 and 5 are used, read only.
Bits 3-4 DTR behavior (&Dn)
Bit 5
Default: 48 (00110000b)
S22
Indicates the status of command options. Only bits 4, 5 and 6 are used, read only.
Bits 4-6 result codes (Xn)
Bit 7
Default: 112 (01110000b)
General Bit Mapped Options Status
Result codes (Vn)
0 = Numeric (V0)
1 = Verbose (Vl) (Default)
Pulse dial PPS selection (&Pn)
0 = 10 PPS (&p0, &p1) (Default)
1 = 20 PPS (&p2)
V.24/General Bit Mapped Options Status
0 = &D0 selected
1 = &D1 selected
2 = &D2 selected (Default)
3 = &D3 selected
DCD behavior (&Cn)
0 = &C0 selected
1 = &C1 selected (Default)
Results Bit Mapped Options Status
0 = X0 selected
4 = X1 selected
5 = X2 selected
6 = X3 selected
7 = X4 selected (Default)
Pulse dial make/break ratio (&Pn)
0 = 33/67 make/break ratio (&P1, &P2) (Default)
1 = 39/61 make/break ratio (&P0)
70