Message Playback - AT&T CLP99283 User Manual

Answering system

Message playback

If you have both new and old messages, you can play either new or old
messages. The caller ID information displays on the screens when you play
messages and you can call back the caller.
When playback begins, the handset and telephone base screens display the
message status, caller ID information, and time and date of the message
recorded. You hear the total number of messages followed by the day and
time of the message. After the last message, the telephone announces, "End
of messages." and the screen displays End of messages.
To listen to messages at the telephone base:
/PLAY/
Press
If there are new and old messages, press q
•
select Play new msgs or Play old msgs, then press
/PLAY/STOP.
• If there are only new or only old messages, they will play automatically.
When the handset is playing a message, its screen shows [2]-Call info and
the caller's name or number. If the caller's information is unavailable, the
handset shows No caller info.
The system announces the number of messages, then begins playback.
The message sequence is shown on the telephone base. If there are no
recorded messages, the telephone base shows No messages and you
hear, "You have no message."
To listen to messages on a cordless handset:
1. When the handset is in idle mode, press
2. Press SELECT
If there are new and old messages, press q
•
new msgs or Play old msgs, then press SELECT.
• If there are only new or only old messages, they will play automatically.
The system announces the number of messages, then begins playback.
The message sequence is shown on the handset. If there are no recorded
messages, the handset shows No messages and you hear, "You have no
message."
on the telephone base to listen to the messages.
STOP
to select Play messages.
CALLER ID
MENU to enter the main menu.
or p
CID
116
or p
DIRECTORY
SELECT or
to select Play
DIR
to