Reconfiguring The Workstation - Compaq AP500 - Professional - 128 MB RAM Reference Manual

6-3

Reconfiguring the Workstation

System configuration is the process of specifying the devices and programs
that make up a system. When you add or remove optional equipment, you
must reconfigure the workstation by running Computer Setup in order for the
changes to be recognized.
Run the Computer Setup utility after you complete the installation. To
configure in Windows NT Workstation, use Control Panel and configure your
specific option.
If configuration settings are incorrect, one or more devices may not work
properly, and you may receive an error message. If this occurs, run the
Computer Setup utility again. See Chapter 2 for more information on
Computer Setup.
Compaq Professional Workstation AP500 Reference Guide