Compaq AP500 - Professional - 128 MB RAM Reference Manual page 125

D-6 POST Error Messages
POST Error Messages and Codes
1793-Secondary
Controller or Disk
Failure
A Critical Error
Occurred Prior to this
Power-Up
A Collectable
Memory Error
Occurred Prior to this
Power-Up
This Workstation has
experienced an NMI
(Hardware Error)
Fixed Disk
Parameter Table or
BIOS Error System
Halted
XX000Y ZZ Parity
Check 2
Audible (beep)
Invalid Electronic
Serial Number
(RESUME=
"F1" KEY)
Error Code
An error has been detected with
the CD-ROM interface.
Critical failure (POST) recorded
into the wellness log.
Single-bit ECC during POST.
As indicated.
Configuration or hardware failure.
Parity RAM failure.
Power-on successful.
The electronic serial number is
corrupt.
As indicated to continue.
Continued
Probable Source
of Problem Action
Run the Diagnostics
utility.
None.
None.
None.
Run the Setup and
Diagnostics utilities.
Run the Setup and
Diagnostics utilities.
None.
Run the Setup and
Diagnostics utilities.
Press the F1 key.