Hardware Upgrade Preparations - Compaq AP500 - Professional - 128 MB RAM Reference Manual

Chapter 6

Hardware Upgrade Preparations

This chapter explains how to prepare the workstation for the installation of
optional hardware upgrades. Information about reconfiguring the workstation
is also discussed to ensure that newly installed components are recognized by
your system. This chapter also identifies all internal components.
IMPORTANT: Compaq recommends that you finish the setup procedures
for the preinstalled software before you install any optional hardware or
third-party devices that were not included with the workstation. For more
information about the setup procedures, refer to the Software Installation
Guide.
To install the following upgrades or optional equipment, see the related
chapter.
Memory (Chapter 7)
Drives (Chapter 8)
Expansion Boards (Chapter 9)
Processors (Chapter 10)
Compaq Professional Workstation AP500 Reference Guide
6-1