Compaq AP500 - Professional - 128 MB RAM Reference Manual page 31

Computer Setup Features
Task
Enable the Power-on Password. For more
information, see the section "Security
Management" in Chapter 3.
Enable/disable network server mode,
keyboard QuickLock, QuickBlank screen
when locked, and QuickLock in energy saver
mode. For more information, see the section
"Security Management" in Chapter 3.
NOTE: These selections appear only if a
Power-on Password is set.
Enable the Setup (administrator) Password.
For more information, see the section
"Security Management" in Chapter 3.
View the current settings of Plug and Play
(PnP) devices and set resources for installed
boards
View the currently installed PCI devices and
view and/or reconfigure settings (IRQ, I/O,
DMA, Memory)
Enable/disable the SCSI controller boot order
for Compaq SCSI options
Enable/disable PCI bus mastering, PCI VGA
palette snooping, and interrupt sharing
Restore factory default settings and exit
Computer Setup
Exit Computer Setup without applying or
saving any changes
Save changes to the system configuration
and exit Computer Setup
Continued
Computer Setup Selection
Click Built-in Devices, then click Security
Management. Under Power-on Password,
click Set.
Click Built-in Devices, then click Security
Management. Under Power-on Password,
select the appropriate options.
Click Built-in Devices, then click Security
Management. Under Setup Password,
select Enable Setup Password.
Click Integrated and Add-in Devices, then
click ISA Boards.
Click Integrated and Add-in Devices, then
click PCI Boards.
Click Integrated and Add-in Devices, then
click PCI Boards. Under SCSI Controller
Boot Order, select Enable Boot Order.
Click Integrated and Add-in Devices, then
click PCI Boards. Under System Options,
select the appropriate options.
Select File, then select Set Defaults and
Exit.
Select File, then select Exit Without
Saving Changes.
Select File, then select Save Changes
and Exit.
Compaq Professional Workstation AP500 Reference Guide
2-5