Removing And Replacing The Bezel - Dell Dimension XPS 50 Reference Manual

support.dell.com

      
   
This chapter provides instructions for removing and replacing the bezel, the drive
cage, and front-panel inserts. These procedures may be required for a drive installa-
tion. The remainder of the chapter covers the installation of different types of drives.
To remove the bezel, perform the following steps:
1. Remove the computer cover and support beam as described in "Removing and
Replacing the Computer Cover and Support Beam" in Chapter 2.
2. While facing the front of the computer, press in the tabs at the top and side of
the bezel as shown in Figure 3-1.
bezel
tabs (3)
tabs (3)
bezel
Installing Drives 3-1