Dell Dimension XPS 50 Reference Manual page 79

support.dell.com
To select an option from this menu, highlight the option and press <Enter>, or press
the key that corresponds to the highlighted letter in the option you choose.
When you select Select Devices to Test from the DIAGNOSTICS MENU, the main
screen of the diagnostics appears (see Figure 4-2). The main screen lists the diagnos-
tic test device groups, lists the devices of the selected device group, and allows you
to select options from a menu. From this screen, you can enter two other types of
screens.
Information on the main screen of the diagnostics is presented in the following areas:
Two lines at the top of the screen identify the version number of the Dell
Diagnostics.
On the left side of the screen, the Device Groups area lists the diagnostic test
groups in the order they will run if you select All from the Run Tests menu. Press
the up- or down-arrow key to highlight a device group.
On the right side of the screen, the Devices for Highlighted Group area lists the
devices to be tested for the selected device group.
Two lines at the bottom of the screen are the menu area. The first line lists the
menu options you can select; press the left- or right-arrow key to highlight a
menu option. The second line gives information about the option currently
highlighted.
Basic Troubleshooting 4-11