support.dell.com
cover release
latches (2)
chassis foot
4.
Face the front of the chassis. Use your thumbs to press in both cover release
latches while pushing the cover backward. Move the cover back about an inch,
and then lift it straight up off the chassis.
If necessary, use both hands and work one side at a time.
5.
Pull up the front end of the support beam (see Figure 2-2) until it snaps free from
its fastener. Lift the front of the beam until the hinged tabs on the back end of the
beam clear their slots.
cover-mounting thumbscrew
Installing Upgrades on the System Board
2-3