Problems After Initial Startup - HP DL360 - ProLiant - G3 Setup And Installation Manual

Problems After Initial Startup

After the server has passed POST, errors may still be encountered, such as an
inability to load the operating system. Use Table D-4 to troubleshoot server
installation problems that occur after the initial startup.
For updated information on supported operating systems, refer to Appendix F,
"Server Specifications," or go to
www.compaq.com/products/servers/platforms/
NOTE: If the server is rebooting repeatedly, be sure that the system is not restarting due to an
ASR power-up caused by another problem. Review Insight Manager for notification of this
event. Refer to the Servers Troubleshooting Guide for more information.
Refer to the Servers Troubleshooting Guide for the following:
•
Information that must be collected when diagnosing software problems and to
provide when contacting support
•
Instructions on how to upgrade the operating system and its drivers
•
Information on available recovery options and advice on minimizing downtime
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
Troubleshooting
D-9