Problems After Initial Startup - HP Proliant ML310 Setup And Installation Manual

Problems After Initial Startup

After the server has passed POST, you may still encounter errors, such as an inability
to load the operating system. Use Table D-4 to troubleshoot server installation
problems that occur after the initial startup.
For updated information on supported operating systems, refer to Appendix F,
"Specifications," or refer to
www.compaq.com/products/servers/platforms/
NOTE: If the server is rebooting repeatedly, be sure that the server is not restarting due to an
Automatic Server Recovery (ASR) power-up caused by another problem. Check Insight
Manager for notification of this event. Refer to the Servers Troubleshooting Guide for more
information.
Refer to the Servers Troubleshooting Guide for the following:
·
Information you must collect when diagnosing software problems and to provide
when contacting support
·
Instructions on how to upgrade the operating system and its drivers
·
Information on available recovery options and advice on minimizing downtime
HP ProLiant ML310 Server Setup and Installation Guide
Troubleshooting
D-9