Post Error Messages And Handling; Table 62. Usb Bios Error Messages; Table 63. Smbios Bios Error Messages - Intel SE7525RP2 Technical Manual

Intel® Server Board SE7320EP2 / Intel® Server Board SE7525RP2 TPS
Error Logging
Message Displayed
Warning! Unsupported USB device found and disabled!
Warning! Port 60h/64h emulation is not supported by this
USB Host Controller!
Warning! EHCI controller disabled. It requires 64bit data
support in the BIOS.
Message Displayed
Not enough space in Runtime area!!. SMBIOS data will
not be available.
9.4.3

POST Error Messages and Handling

Whenever possible, the BIOS will output the current boot progress codes on the video screen.
Progress codes are 32-bit quantities plus optional data. The 32-bit numbers include class,
subclass and operation information. The class and subclass fields point to the type of hardware
that is being initialized, whereas the operation field represents the specific initialization activity.
Based upon the data bit availability to display progress codes, a progress code can be
customized to fit the data width. The higher the data bit, the higher the granularity of information
that can be sent on the progress port. The progress codes may be reported by system BIOS or
option ROMs.
The Response section in the following table is divided into three types:
Warning or Not an error – The message is displayed on the screen. The system will
continue booting with a degraded state. The user may want to replace the erroneous
unit.
Pause – The message is displayed on the screen, an error is logged to the SMBIOS log,
and user input is required to continue. The user can take immediate corrective action or
choose to continue booting.
Halt – The message is displayed on the screen, an error is logged to the SMBIOS log,
and the system cannot boot unless the error is resolved. The user needs to replace the
faulty part and restart the system.
100

Table 62. USB BIOS Error Messages

This message is displayed when a non-bootable USB
device is enumerated and disabled by the BIOS.
This message is displayed to indicate that port 60h/64h
emulation mode cannot be enabled for this USB host
controller. This condition occurs if USB KBC emulation
option is set for non-SMI mode.
This message is displayed to indicate that EHCI controller
is disabled because of incorrect data structure. This
condition occur if the USB host controller needs 64-bit
data structure while the USB is ported with 32-bit data
structure.

Table 63. SMBIOS BIOS Error Messages

This message is displayed when the size of the SMBIOS
data exceeds the available SMBIOS runtime storage size.
Intel order number D24635-001
Description
Description
Revision 1.0