Configuration Jumpers; Figure 4. Configuration Jumper Location; Table 3. Configuration Jumpers - Intel SE7520AF User Manual

Server Board Features

Configuration Jumpers

Table 3. Configuration Jumpers

Jumper Name Pins
CMOS Clear 1-2
(J2H1)
2-3
Password Clear OFF
(J4H3)
ON
BIOS Recovery OFF
(J4H1)
ON
22
BIOS
SEL
Normal
Bank 0
3
J1B1
CMOS
CLR
3
J2H1

Figure 4. Configuration Jumper Location

What happens at system reset...
BMC Control: These pins should be jumpered for normal operation.
Force Erase: If these pins are jumpered, the CMOS settings will be cleared on the next
reset. These pins should not be jumpered for normal operation.
Protect: These pins should not be jumpered for normal operation.
Erase: If these pins are jumpered, administrator and user passwords will be cleared on
the next reset. These pins should not be jumpered for normal operation.
Normal Boot: These pins should not be jumpered for normal operation
Recovery Boot: If these pins are jumpered, the system will attempt to recover the
BIOS by loading the BIOS code into the flash device from a floppy disk. This jumper is
typically used when the BIOS has become corrupted. These pins should not be
jumpered for normal operation.
RECOVERY
BOOT
J4H1
FRB
HALT
3
J4H3 J4H2
PASSWORD
CLEAR
TP00723