7 Technical Reference
Configuration Jumpers
Table 33.
Configuration Jumper (J1H1)
Jumper Name
CMOS normal
operation
CMOS clear
Password normal
operation
Password Clear
BIOS normal
operation
BIOS Recovery
BMC normal
operation
BMC Flash EN
Figure 32. Configuration Jumper Location
Pins
What happens at system reset
1-2
These pins are for normal operation.
2-3
If these pins are jumpered, the CMOS settings will be cleared on the next
reset. These pins should not be jumpered for normal operation.
5-6
These pins are for normal operation.
6-7
If these pins are jumpered, the password will be cleared on the next reset.
These pins should not be jumpered for normal operation.
9-10
These pins are for normal operation.
10-11
If these pins are jumpered, the system will attempt BIOS recovery. These
pins should not be jumpered for normal operation.
1-2
These pins are for normal operation.
2-3
If these pins are jumpered, the system will allow the BMC Flash to be
overwritten by the firmware update utility.
J106
OM14670
119