Running The Ssu - Intel SE7501HG2 Product Manual

If you choose to run the SSU from a set of DOS diskettes, you must create the SSU diskettes from
the Resource CD-ROM as follows:
1. Boot the System Resource CD-ROM to the Server Configuration Wizard.
2. Choose Create Diskettes > Create Diskettes by Device/Function > System Setup Utility.
3. Follow the instructions displayed.
Alternatively, if you have a workstation with the Microsoft Windows operating system, you can
insert the CD into that system and create the diskettes on that system.

Running the SSU

When the SSU starts in the default local execution mode, it accepts input from the keyboard or
mouse. The SSU presents a VGA-based GUI on the primary monitor.
If you run the SSU from read-only media you cannot save user preference settings (such as screen
colors).
The SSU supports ROM-DOS version 6.22. The SSU will not operate from a "DOS box" running
under an operating system such as Windows.
Start the SSU using one of the following methods:
From diskettes: Insert the first SSU diskette in drive A and boot the server from the diskette.
You are prompted to insert the second diskette. After loading completes the SSU starts
automatically.
From the System Resource CD: Boot the server to the Server Configuration Wizard and start
the SSU from the Server Configuration Utilities menu.
From the Service Partition: Boot the server to the Service Partition and execute the following
DOS commands:
C:\> cd ssu
C:\SSU> ssu.bat
The mouse driver loads if it is available; press <Enter> to continue.
When the SSU title appears on the screen, press <Enter> to continue.
86
Intel Server Board SE7501HG2 Product Guide