Table 15. Memory Configuration Submenu - Intel SE7501HG2 Product Manual

Table 14. Peripheral Configuration Submenu (continued)
Parallel Port Mode
ECP Mode DMA Channel
Diskette Controller
Legacy USB Support
Front Panel USB
Table 15. Memory Configuration Submenu
Feature
Extended Memory
Test
Memory Bank #1
(DIMM 1A and 1B)
Memory Bank #2
(DIMM 2A and 2B)
Memory Bank #3
(DIMM 3A and 3B)
Memory Retest
POST and the BIOS Setup Utility
Normal Parallel Port Modes:
Bi-directional
Normal – Output only. The standard printer connection.
EPP
Bi-directional – Standard bi-directional mode.
ECP
Enhanced parallel port (EPP) – Selection based on which
EPP version the printer supports. Only choose a mode that the
parallel port device (such as a printer) supports. Check the
parallel port device documentation for this information. If this
information cannot be located, use the default setting.
Extended capabilities port (ECP) – Select only if the printer
supports it. ECP uses hardware to generate handshaking
signals, similar to EPP. However, it uses DMA channels to
move data, a FIFO buffer to send and receive data, and
real-time data compression.
0 Selects the DMA channel for ECP mode.
1
2
3
Enabled
Enables or disables the diskette controller in the Super I/O.
Disabled
Disabled If disabled, legacy USB support is turned off at the end of
Keyboard only BIOS POST.
Auto
Keyboard and
Mouse
Enabled If disabled, the front panel USB ports are inactive.
Disabled
Choices or
Display Only Description
1 MB Selects the size of step to use during the extended RAM tests.
1 KB When disabled is selected, extended memory tests are not run. The
Every Location Every Location selection will increase the boot time.
Disabled
Installed Displays the current status of Memory Bank 1. Disabled indicates
Not Installed
that a DIMM in the bank has failed and the entire bank has been
Disabled disabled.
Installed Displays the current status of Memory Bank 2. Disabled indicates
Not Installed that a DIMM in the bank has failed and the entire bank has been
Disabled disabled.
Installed Displays the current status of Memory Bank 2. Disabled indicates
Not Installed
that a DIMM in the bank has failed and the entire bank has been
Disabled disabled.
Enabled When enabled is selected, the BIOS retests all memory on the next
Disabled boot. This option automatically reverts to disabled upon booting.
69