Instantly Available Pc Technology; Figure 4. Location Of The Standby Power Indicator Led Cr7J1 - Intel S875WP1 - EATX MBD 875 P4 DDR-2CH SATA RAID VID GETH Product Manual

Instantly Available PC Technology

CAUTION
For Instantly Available PC technology, the +5 V standby line for the power
supply must be capable of providing adequate +5 V standby current. Failure
to provide adequate standby current when implementing Instantly Available
PC technology can damage the power supply.
The S875WP1-E server board supports the PCI Bus Power Management Interface Specification.
An add-in board that supports this specification can participate in power management and can be
used to wake the computer.
The use of Instantly Available PC technology requires operating system support and PCI 2.2
compliant add-in cards and drivers.
The standby power indicator LED shows that power is still present even when the computer
appears to be off. Figure 4 shows the location of the standby power indicator LED.
CAUTION
If AC power has been switched off and the standby power indicator is still lit,
disconnect the power cord before installing or removing any devices
connected to the board. Failure to do so could damage the board and any
attached devices.

Figure 4. Location of the Standby Power Indicator LED CR7J1

Server Board Features
CR7J1
TP00185
29