Figure 12. Opening Processor Socket Lever; Figure 13. Opening Load Plate - Intel S5000XVN - Workstation Board Motherboard User Manual

6. Disconnect and remove any components necessary to access the processor sockets.
See the documentation that came with your chassis for instructions on removing
chassis components.
7. Push down on the lever attached to the processor socket. While holding the lever
down, pull it towards the center of the board to disengage the lever from the hook.
Fully open the lever. See
8. Push down on the rear tab of the load plate to swing the front of the load plate up
slightly. Fully open the load plate. See
32
Figure 12.

Figure 12. Opening Processor Socket Lever

Figure 13. Opening Load Plate

AF000095
Figure 13.
AF000096
®
Intel Workstation Board S5000XVN