Problems With Application Software That Ran Correctly Earlier; Devices Are Not Recognized Under Device Manager (Windows* Operating System); Hard Drive(S) Are Not Recognized - Intel S5000XVN - Workstation Board Motherboard User Manual

Workstation board
Hide thumbs Also See for S5000XVN - Workstation Board Motherboard:
Table of Contents

Advertisement

Problems with Application Software that Ran Correctly
Earlier
Problems that occur after the system hardware and software have been running correctly
sometimes indicate equipment failure. However, they can also be caused by file
corruption or changes to the software configuration.
Check the following:
If you are running the software from a USB floppy disk, CD-ROM or DVD-ROM,
try a different disk.
Check your system for a virus infection.
Uninstall and reinstall the software. Make sure all necessary files are installed.
If the problems are intermittent, there may be a loose cable, dirt in the keyboard (if
keyboard input is incorrect), a marginal power supply, or other random component
failures.
If you suspect that a transient voltage spike, power outage, or brownout might have
occurred, reload the software and try running it again. Symptoms of voltage spikes
include a flickering video display, unexpected system reboots, and the system not
responding to user commands.
Note: Random errors in data files: If you are getting random errors in your data files, they may
be getting corrupted by voltage spikes on your power line. If you are experiencing any of
the above symptoms that might indicate voltage spikes on the power line, you may want to
install a surge suppressor between the power outlet and the system power cord.
Devices are not Recognized under Device Manager
(Windows* Operating System)
The Windows* operating systems do not include all of the drivers for the Intel
onboard NICs, and other components. See
page viii

Hard Drive(s) are not Recognized

Check the following:
Make sure the drive is not disabled in BIOS Setup.
Make sure the drive is connected correctly and that is plugged into the power supply.
Make sure the drive is compatible. See
link to the tested drives.
Make sure you have not exceeded the power budget for the workstation. See
"Additional Information and Software"
budget.
®
Intel
Workstation Board S5000XVN
for a link to the current drivers and chipset files.
"Additional Information and Software" on
"Additional Information and Software"
for a link to software to check your power
®
chipsets,
for a
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents