Table 2. Workstation Board Features - Intel S5000XVN - Workstation Board Motherboard User Manual

Table 2
Processor support
System memory support
®
Intel 5000X Chipset
Cooling
Add-in card slots
Video support
2
summarizes the features of the workstation board.

Table 2. Workstation Board Features

Feature
Support for one from the following list:
•
•
•
•
•
•
•
•
Support for
•
•
•
3-pin fans are compatible with all fan headers. 4-pin fans should be
used only with the following fans:
•
•
•
•
•
•
Sys Fan 3 and Sys Fan 4 are connected to the CPU1 PWM, which
is programmed to work with the 4-pin active heatsink fans.
Five expansion slots:
•
•
•
and one of from the following list
•
•
Use the PCI Express x16 slot to add the video card of your choice
Description
Up to two Dual-Core Intel
sequence with a 677-, 1066-, or 1333-MHz front side bus
Up to two Quad-Core Intel
with a 1066- or 1333-MHz front side bus
Up to two 45nm 2P Dual-Core Intel
Product code S5000XVNSATAR and S5000XVNSASR only
Up to two 45nm next generation Quad-Core Intel
processors. Product code S5000XVNSATAR and
S5000XVNSASR only
Eight FBDIMM sockets (DDR2-533 and DDR2-667) supporting
32 GB maximum memory
Quad-channel memory architecture
®
Intel 6321ESB I/O Controller Hub
®
Intel 5000X Memory Controller Hub
Two processor fans (4-pin headers)
Four front fans (6-pin headers)
Two rear fans (4-pin header)
CPU1 Fan
CPU2 Fan
Sys Fan 1
Sys Fan 2
Sys Fan 5
Sys Fan 6
One PCI-X* 64-bit / 100-MHz slot
One PCI-X* 64-bit / 100- / 133-MHz slot
One PCI Express x16 slot
Two PCI Express* x4 slots (Product code S5000XVNSAS or
S5000XVNSASR)
One PCI Express* x4 slot and one PCI Express x8 slot
(Product code S5000XVNSATA or S5000XVNSATAR)
® ®
Xeon processors 5000 or 5100
® ®
Xeon processors 5300 sequence
® ®
Xeon processors.
®
®
Intel Workstation Board S5000XVN
®
Xeon