Cr_Idslot2 Command; Cr_Idslot3 Command; Cr_Idslot4 Command - Sanyo PLV-WF20 - 6000 Lumens Manual

PLV-WF20 Expand Serial Command Functional Specifications
Unacceptable

9.7.14 CR_IDSLOT2 Command

Command "CR_IDSLOT2" [CR]
Get ID information on Slot 2.
Details This command is to recognize the inserted slot board and specify the valid Input
source.
Acceptable
Response
Unacceptable

9.7.15 CR_IDSLOT3 Command

Command "CR_IDSLOT3" [CR]
Get ID information on Slot 3.
Details This command is to recognize the inserted slot board and specify the valid Input
source.
Acceptable
Response
Unacceptable

9.7.16 CR_IDSLOT4 Command

Command "CR_IDSLOT4" [CR]
Get ID information on Slot 4.
Details This command is to recognize the inserted slot board and specify the valid Input
source.
Acceptable
Response
Unacceptable
"00" --------------- Video board
"01" --------------- D-sub board
"03" ---------------Network board
"04" --------------- Component board
"06" --------------- HD-SDI board
"07" --------------- SD-SDI board
%1 "08" --------------- DUAL-SDI board
"09" --------------- HDCP-DVI board
"18" --------------- New HDCP-DVI board
"19" --------------- New Component & Video board
"30" --------------- On-board(DVI-DSub+D-Sub)
"42" --------------- On-board(5BNC+S-video)
"99" --------------- No board inserted
"?" [CR]
"000_%1" [CR]
%1 The same as CR_IDSLOT1
"?" [CR]
"000_%1" [CR]
%1 The same as CR_IDSLOT1
"?" [CR]
"000_%1" [CR]
%1 The same as CR_IDSLOT1
"?" [CR]
Valid Input Source: VIDEO, YC, S-VIDEO
Valid Input Source: ANALOG
Valid Input Source: NONE (BLANK)
Valid Input Source: ANALOG, YPBPR
Valid Input Source: HD-SDI
Valid Input Source: SD-SDI
Valid Input Source: SDI1, SDI2
Valid Input Source: DIGITAL, ANALOG, HDCP, SCART
Valid Input Source: DIGITAL, ANALOG, HDCP, SCART
Valid Input Source: ANALOG, YPBPR, VIDEO,S-VIDEO
Valid Input Source: DIGITAL, ANALOG, HDCP, SCART
Valid Input Source: ANALOG, YPBPR, VIDEO,S-VIDEO
53/68