Input Read Command; Cr_Input Command; Cr_Source Command - Sanyo PLV-WF20 - 6000 Lumens Manual

PLV-WF20 Expand Serial Command Functional Specifications

9.7 Input Read Command

9.7.1 CR_INPUT Command

Command "CR_INPUT" [CR]
Details Get selected INPUT No.
Acceptable
Response
Unacceptable

9.7.2 CR_SOURCE Command

Command "CR_SOURCE" [CR]
Details Get selected Source
Acceptable
Response
Unacceptable
"000_%1" [CR]
%1 "1" – "4"
"?" [CR]
"000_%1" [CR]
"DIGITAL" --------------------- DVI Input is selected
"ANALOG --------------------- ANALOG RGB is selected
"VIDEO" ----------------------- Video Input is selected
"S-VIDEO" -------------------- S-VIDEO Input is selected
"YPBPR" ---------------------- Y/Pb/Pr Input is selected
"SDI1" -------------------------- DF-SDI1 Input is selected
%1
"SDI2"---- ---------------------- DF-SDI2 Input is selected
"HDCP" ----------------------- HDCP Input is selected
"SCART" ---------------------- SCART Input is selected
"NETWORK" ----------------- NETWORK Input is selected
"BLANK" ---------------------- without Source (LAN card)
"NOCARD" --------------------- There is no board inserted
"Error Code" [CR] -------------- When command is invalid in the
given condition (such as being selected input)
"?" [CR] --------- When unknown command is received
49/68