Syntax; Options And Parameters - HP StorageWorks P9000 Reference Manual

Syntax

pairdisplay{ -h | -q | -z | -I[H][M][instance#] or I[CA][BC][instance#]
| -g <group> | -d <pair Vol> | -d[g] <raw_device> [MU#]
| -FHORC [MU#]| -FMRCF
| -c | -l
| -v ctg

Options and parameters

Option
-h
-q
-z or -zx
-I[H][M]
[instance#]
or
-I[CA][BC]
[instance#]
-g <group>
-d <pair Vol>
-d[g]
<raw_device>
[MU#]
- FHORC [MU#]
or -FCA [MU#]
-FMRCF [MU#]
or -FBC [MU#]
-d[g] <seq#>
<LDEV#> [MU#]
-c
-l
-fx
54 Replication commands
[MU#] | -d[g] <seq#> <LDEV#> [MU#]
| -f[xcdmew] | -CLI | -m <mode> | -v jnl[t]
| -v pid }
Description
Displays Help/Usage and version information.
Terminates the interactive mode and exits the pair volume check command.
Makes the pairdisplay command enter the interactive mode. The -zx option guards performing of
the HORCM in the interactive mode. When this option detects a HORCM shutdown, interactive mode
terminates.
OpenVMS cannot use the -zx option
Specifies the command as [HORC]/[HOMRCF] or [Continuous Access Synchronous]/[Business Copy],
and used when specifying the RAID Manager instance number.
Specifies the group name defined in the configuration definition file. This option must always be
specified. The command is executed for the specified group unless the -d <pair Vol> option is
specified.
This option is used to specify the paired logical volume name defined in the configuration definition
file. When this option is specified, the command is executed for the specified paired logical volumes.
Searches a group on the configuration definition file (local instance) for the specified raw_device,
and if the specified raw_device is contained in the group, the target volume is executed as the paired
logical volume (-d) or group (-dg). This option is effective without specification of "-g <group>" option.
If the specified the raw_device is contained in two or more groups, the command is executed on the
first group.
Forcibly specifies a cascading Continuous Access Synchronous volume for specified pair logical
volumes on Business Copy environment. If the -l option is specified, this option displays status of a
cascading Continuous Access Synchronous volume on a local host (near site). If no -l option is
specified, this option displays status of a cascading Continuous Access Synchronous volume on a
remote host (far site). This option cannot be specified with -m <mode> option on the same command
line.
Forcibly specifies a cascading Business Copy volume for specified pair logical volumes on Continuous
Access Synchronous environment. If the -l option is specified, this option displays status of a cascading
Business Copy volume on a local host (near site). If no -l option is specified, this option displays status
of a cascading Business Copy volume on a remote host (far site). This option cannot be specified
with -m <mode> option on the same command line.
Searches a group on the configuration definition file (local instance) for the specified LDEV, and if
the specified LDEV is contained in the group, the target volume is executed as the paired logical
volume (-d) or group (-dg). This option is effective without specification of "-g <group>" option. If the
specified LDEV is contained in two or more groups, the command is executed on the first group. The
<seq #> <LDEV #> values can be specified in hexadecimal (by addition of "0x ") or decimal notation.
Checks the configuration of the paired volume connection path (physical link of paired volume among
the servers) and displays illegal pair configurations. If this option is not specified, the status of the
specified paired volume is displayed without checking the path configuration.
Displays the paired volume status of the local host (which issues this command).
Displays the LDEV ID as a hexadecimal number.