HP StorageWorks P9000 Reference Manual page 170

# raidcom get path -path_grp 1
PHG GROUP STS CM IF MP# PORT WWN PR LUN PHS Serial# PRODUCT_ID
1 1-1 NML E D 2 CL1-A 50060e8005fa0f36 1 3 NML 60010 VSP
1 1-1 NML E D 2 CL2-A 50060e8005fa0f38 2 3 NML 60010 VSP
Description on each column in output example
-PHG
This displays the path group number for the external volume.
-GROUP
This displays the external volume group number.
-STS
This displays the following status of the external volume.
- NML: this means the status of "Normal" in external volume.
- CHK: this means the status of "Checking" in external volume.
- SYN: this means the status of "Cache Destage" in external volume.
- DSC: this means the status of "Disconnect" in external path for an external volume.
- BLK: this means the status of "blockading" in external path for an external volume.
- UNK: this means the status of "Unknown" in external volume.
- WAR: this means the status of "Warning" in external volume.
-CM
This displays the cache mode for external volume.
E: Enable, D: Disable
-IF
This displays the cache inflow control for external volume.
E: Enable, D: Disable
-MP#
This displays the MP Blade ID for the external volume owner.
-PORT
This displays the port number.
-WWN
This displays the target wwn on the external storage system.
-PR
This displays the priority number in the external volume path group.
-LUN
This displays the LUN in the port on the external storage system side.
-PHS
This displays the following status of the external path.
- NML: this means the status of "Normal" in external path.
- CHK: this means the status of "temporary blockading " in external path.
- BLK: this means the status of "blockading" in external path.
- DSC: this means the status of "disconnected" in external path.
- UNK: this means the status of "Unknown" in external path.
-Serial#
This displays the serial number of external storage system.
170 Configuration setting commands