Raidcom Modify Pool; Syntax - HP StorageWorks P9000 Reference Manual

Description on each column in output example
PID
This displays the Snapshot pool ID.
POLS
This displays the following status in the Snapshot pool.
- POLN: "Pool Normal" (The pool is in the normal status.)
- POLF: "Pool Full" (The pool is in the overflow status exceeding the threshold.)
- POLS: "Pool Suspend" (The pool is in the overflow status exceeding the threshold and is suspended.)
- POLE: "Pool failure" (The pool is suspended in the failure status.)
In this status, the pool information cannot be displayed.
U(%)
This displays the usage rate of the pool.
SSCNT
This displays the number of volumes in the pool.
POOL_NAME
This displays the pool name.
Available (MB)
This displays the capacity available to the volume data in the pool.
Capacity (MB)
This displays the total capacity of the pool.
Seq#
Product serial number.
Num
This displays the number of LDEV configured the pool.
LDEV#
This displays the first number of LDEV configured the pool.
H(%)
This displays threshold for the pool.
VCAP (%)
This displays the maximum reserved rate of a V-VOL for the pool capacity. "-" indicates unlimited.

raidcom modify pool

Sets the option of a pool for Snapshot/Thin Provisioning/Smart Tiers.
When specifying the -status option, the operation is executed asynchronously with the command
input. Check the completion of this process on the raidcom get command_status command.

Syntax

raidcom modify pool -pool {<pool ID#> | <pool naming>}
{ -status <status> | -user_threshold <%> | -tier <Tier number><threshold>| -subscription <%>
| -pool_attribute <pool_attribute>}
172 Configuration setting commands