Raidcom Get Lun; Examples; Syntax; Options And Parameters - HP StorageWorks P9000 Reference Manual

Examples

Displaying LUs defined to the external storage system port: 50060e80,161 1a870 connected to
the port: CL7-A (External port).
#raidcom discover lun -port CL7-A -external_wwn 50060e80,1611a870
PORT WWN LUN VOL_Cap(BLK) PRODUCT_ID E_VOL_ID_C
CL7-A 50060e801611a870 0 819840 OPEN-V 00300 HITACHI R50111A803 HITACHI R50111A803
CL7-A 50060e801611a870 1 819840 OPEN-V 00301 HITACHI R50111A803 HITACHI R50111A803
CL7-A 50060e801611a870 2 819840 OPEN-V 00302 HITACHI R50111A803 HITACHI R50111A803
CL7-A 50060e801611a870 3 819840 OPEN-V 00303 HITACHI R50111A803 HITACHI R50111A803
CL7-A 50060e801611a870 4 819840 OPEN-V 00304 HITACHI R50111A803 HITACHI R50111A803
CL7-A 50060e801611a870 5 819840 OPEN-V 00305 HITACHI R50111A803 HITACHI R50111A803
CL7-A 50060e801611a870 6 819840 OPEN-V 00306 HITACHI R50111A803 HITACHI R50111A803
CL7-A 50060e801611a870 7 819840 OPEN-V 00307 HITACHI R50111A803 HITACHI R50111A803
CL7-A 50060e801611a870 8 819840 OPEN-V 00308 HITACHI R50111A803 HITACHI R50111A803
CL7-A 50060e801611a870 9 819840 OPEN-V 00309 HITACHI R50111A803 HITACHI R50111A803
CL7-A 50060e801611a870 10 819840 OPEN-V 0030A HITACHI R50111A803 HITACHI R50111A803
PORT
Displays the External Initiator port number.
WWN
Displays the WWN on the external storage system.
LUN
Displays the LUN of the port on external storage system.
VOL_Cap (BLK)
Displays the capacity of the external volume in units of 512 bytes.
PRODUCT_ID
Displays the Product_ID included in the SCSI Inquiry command respond of the external volume.
E_VOL_ID_C
This displays the volume identifier including in the SCSI inquiry command of the external volume.

raidcom get lun

Displays the LU path information defined in the specified port and the host group.
If the specified port does not exist, it will be rejected with EX_ENOOBJ.

Syntax

raidcom get lun -port <port> <host group name>

Options and parameters

Option
-port <port>[<host
group name>]
Examples
Displaying the LU information defined to the port CL4-E, the host group #0.
# raidcom get lun -port CL4-E-0
PORT GID HMD LUN NUM LDEV CM Serial# HMO_BITs
CL4-E 0 LINUX/IRIX 0 1 0 CM 63528 2 13
Description
Specifies a port number, a host group ID, and a host group name. It cannot be specified when
more than 64 characters are set for the host group name. Use the host group ID. If setting the
host group ID or the host group name is omitted, the LU path information on host group ID 0
is displayed.
For example:
CL1-A
CL1-A-g (g: 0-255)
CL1-A Linux_X86
raidcom get lun 165