Syntax; Options And Parameters - HP StorageWorks P9000 Reference Manual

Figure 17 Pair Event Waiting

Syntax

pairevtwait{ -h | -q | -z | -I[H][M][instance#] or I[CA][BC][instance#]
| -g <group> | -d <pair Vol> | -d[g] <raw_device> [MU#]
| -FHORC [MU#] | -FMRCF [MU#] | -d[g] <seq#> <LDEV#> [MU#]
| -s [s] <status> ... | -t <timeout>[intervall] | -nowait[s]
| -l | -nomsg }

Options and parameters

Option
-h
-q
-z or -zx
-I[H][M]
[instance#]
or
-I[CA][BC]
[instance#]
-g <group>
-d <pair Vol>
-d[g]
<raw_device>
[MU#]
-FHORC [MU#]
or -FCA [MU#]
Description
Displays Help/Usage and version information.
Terminates the interactive mode and exits this command.
Makes the pairevtwait command enter the interactive mode. The -zx option guards performing of
the HORCM in the interactive mode. When this option detects a HORCM shutdown, interactive mode
terminates.
OpenVMS cannot use the -zx option.
Specifies the command as [HORC]/[HOMRCF] or [Continuous Access Synchronous]/[Business Copy],
and used when specifying the RAID Manager instance number.
Specifies a group name defined in the configuration definition file. This option must always be
specified. The command is executed for the specified group unless the -d <pair Vol> option is
specified.
Specifies a paired logical volume name defined in the configuration definition file. When this option
is specified, the command is executed for the specified paired logical volumes.
Searches a group on the configuration definition file (local instance) for the specified raw_device,
and if the specified raw_device is contained in the group, the target volume is executed as the paired
logical volume (-d) or group (-dg). This option is effective without specification of "-g <group>" option.
If the specified the raw_device is contained in two or more groups, the command is executed on the
first group.
Forcibly specifies a cascading Continuous Access Synchronous volume for specified pair logical
volumes on Business Copy environment. If the -l option is specified, this option tests status of a
cascading Continuous Access Synchronous volume on a local host (near site). If no -l option is
specified, this option tests status of a cascading Continuous Access Synchronous volume on a remote
host (far site). The target Continuous Access Synchronous volume must be P-VOL or SMPL.
pairevtwait 41