Raidcom Add Snap_Pool; Options And Parameters; Examples; Syntax - HP StorageWorks P9000 Reference Manual

Options and parameters

Option
-resource_name <resource
group name>

Examples

Releasing the exclusive lock of a resource group: meta_resource.
raidcom unlock resource -resource_name meta_resource

raidcom add snap_pool

Creates pools/adds pool VOLs for Snapshot by the specified LDEVs. A device group can also be
specified instead of an LDEV.
When specifying a pool that is already created for Snapshot, the specified LDEV is added as a
pool volume.
Specify either a pool ID or a pool name. If the specification of both pool ID and pool name is
omitted, it will be rejected with EX_REQARG.
This command is executed asynchronously with the command input. Check the completion of this
process on the raidcom get command_status command.

Syntax

raidcom add snap_pool {{-pool_id <pool ID#> [-pool_name <pool naming>]
| -pool_name <pool naming>[-pool_id <pool ID#>]} | -pool_id <pool ID#> -pool_name <pool naming>}}
{-ldev_id <ldev#>
-device_grp_name <device group name> [<device name>]}[-user_threshold <%> ]
Options and parameters
Option
-pool_id <pool ID#>
-pool_name <pool
naming>
-ldev_id <ldev#>
[ -cnt <count> ]
186 Configuration setting commands
Description
Specifies a name of resource group (max. 32 characters).
Only the "meta_resource" group is defined (which cannot be changed).
Specify "meta_resource".
[-cnt<count>] | -grp_opt <group option>
Description
Specifies a pool ID (0- 1 27) to a pool for Snapshot.
When the specification of pool ID is omitted, a pool name must be specified. When the pool
name is specified and the pool ID is omitted, the pool ID is allocated automatically.
Specifies a pool name of a pool for Snapshot. Up to 32 characters can be specified.
When specifying a pool ID or a pool name, if a pool name exists in the specified pool ID,
the pool name is overwritten. If the pool volume is added by specifying only a pool ID, the
pool name will not be changed. When the specification of pool name is omitted, a pool ID
must be specified. When the pool ID is specified and the pool name is omitted, a pool name
is allocated automatically in the form of "New Pool<number>."
Specifies an LDEV number (0-65279). Up to 64 of LDEVs can be specified at a time.
For example:
-ldev_id 100
-ldev_id 100- 1 10
-ldev_id 100 -cnt 10
Specifies a count (2-64).
The count becomes singular if not specified.
Up to 64 of LDEVs can be specified at a time.