Arguments; Examples - HP StorageWorks P9000 Reference Manual

Arguments

Argument
drive: hdisk#
[partition #]
drive:
[\directory]
Volume#
Restriction

Examples

The following examples show the mount subcommand used as an option of the pairsplit command
and its outputs.
mount subcommand example for Windows NT
pairsplit -x mount F: hdisk2 p1
pairsplit -x mount
Drive FS_name
C: FAT
F: FAT
G: NTFS
Z: CDFS
This example executes mount from command option of the pairsplit, mounting the F: drive to
partition1 on disk drive2 and the G: drive to partition1 on disk drive1, and then displays the
mounted devices.
mount subcommand example for Windows 2008/2003/2000
pairsplit -x mount
pairsplit -x mount
Drive FS_name
C: NTFS
F: NTFS
D: NTFS
D:\hd1 NTFS
D:\hd2 NTFS
G: NTFS
This example executes mount from command option of the pairsplitand then displays the mounted
devices. The F: drive is mounted to harddiskvolume2, D: is mounted to harddiskvolume3, D:\hd1
directory ('hd1' directory on D: drive) is mounted to harddiskvolume4, D:\hd2 directory is mounted
to harddiskvolume5, and G: drive is mounted to harddiskDmVolumes\...\Volume1 for spanned
volume configured with three hard disks.
Output of the mount subcommand:
Description
Specifies the logical drive, hard disk drive (number), and partition to be mounted.
Specifies the logical drive and LDM volume name and number to be mounted. Volume# must be
specified '\Vol# or \Dms# or \Dmt# or \Dmr# ' as LDM volume for Windows 2008/2003/2000.
To mount HarddiskVolumeX: -x mount C: hdX or -x mount C: \VolX
For information on '\Vol# or \Dms# or \Dmt# or \Dmr#' for LDM volumes, see Volume Discovery
Function in the User and Reference Guide.
[\directory]: Specifies the directory mount point on the logical drive.
pairsplit -x mount D:\hd1 \Vol8 D:\hd1 <+> HarddiskVolume8 pairsplit -x mount D:\hd2 \Vol9
D:\hd2 <+> HarddiskVolume9
The partition on the specified disk drive (hard disk) must be recognized on the Windows system.
[\directory] for the mount must be specified a mount point without embedded space character.
If [\directory] is detected as mount point with embedded space (For example, aaa bbb), then the
directory is shown by adding "..." to first strings as below.
pairsplit -x mount
Drive FS_name VOL_name Device Partition ... Port PathID Targ Lun
D: NTFS Null Harddiskvolume3 ... Harddisk2
D:\aaa... NTFS Null Harddiskvolume4 ... Harddisk3
The same method is used for "inqraid $LETALL" and "raidscan -pi $LETALL -find" command.
VOL_name Device
Null Harddisk0
Null Harddisk2
Null Harddisk1
Null CdRom0
F: hdisk2
VOL_name Device
Null Harddiskvolume1
Null Harddiskvolume2
Null Harddiskvolume3
Null Harddiskvolume4
Null Harddiskvolume5
Null HarddiskDmVolumes\ \Volume1
-x mount G: hdisk1 p1
Partition ...
Partition1 ...
Partition1 ...
Partition1 ...
... Unknown
Partition ... Port PathID
... Harddisk0
... Harddisk1
... Harddisk2
... Harddisk3
... Harddisk4
... Harddisk5[3]
Port PathID Targ
1 0 0
2 0 5
2 0 5
Targ Lun
Windows subcommands
Lun
0
1
0
1 1 1