Command Syntax - HP StorageWorks NAS 8000 - Version 1.6.X Command Reference Manual

Command Syntax

To execute text commands, execute the commands at the command prompt as shown in the
following sections, where:
Table 1: Sample Command Syntax
% getNetworkCardList
bond0
bond1
eth0
% getNetworkCardIpAddress eth0
10.1.1.1
% setNetworkCardIpAddress eth0 10.1.1.2
HP StorageWorks NAS 8000 Command Reference
% represents the system prompt and is not part of the command to be entered.
Input parameters (inParam[#]) are entered at the end of the command and are separated by
spaces.
Output parameters (outParam[#]) are displayed on screen or returned to the command
script.
command
outParam[0]
outParam[1]
outParam[2]
command inParam[0]
outParam[0]
command inParam[0] inParam[1]
Overview
17