Raidcom Get Snap_Pool; Examples; Syntax; Options And Parameters - HP StorageWorks P9000 Reference Manual

Option
-grp_opt <group option>
-device_grp_name
<device group name>
[<device name>]
[-user_threshold <%> ]

Examples

Using LDEVs:400, 401, and 402, creating a pool of Pool ID:1, Pool Name: my_ss_pool for
Snapshot.
# raidcom add snap_pool -pool_id 1 -pool_name my_ss_pool -ldev_id 400 401 402
Using LDEVs:500, 501, and 502, creating a pool of Pool ID: Allocated automatically, Pool Name:
my_ss_pool for Snapshot.
add snap_pool -pool_name my_ss_pool -ldev_id 500 501 502
Using LDEVs:600, 601, and 602, creating a pool of Pool ID: 2, Pool Name: Allocated automatically
for Snapshot.
# raidcom add snap_pool -pool_id 2 -ldev_id 600 601 602
Using LDEV belonging to the device group: grp1, creating a pool of Pool ID: 1, Pool Name:
Allocated automatically for Snapshot.
raidcom add snap_pool -pool_id 1 -grp_opt ldev -device_grp_name grp1

raidcom get snap_pool

Displays pool information for Snapshot.

Syntax

raidcom get snap_pool

Options and parameters

None
Examples
Displaying pool information for Snapshot.
raidcom get snap_pool
ID POLS U(%) SSCNT Available(MB) Capacity(MB) Seq# Num LDEV# H(%)
003 POLS 100 10000
Description on each column in output example
PID
This displays the pool ID.
POLS
This displays the following status of the pool.
- POLN: "Pool Normal" (The pool is in the normal status.)
Description
Specifies the device information extracted from the LDEV belonging to the device group.
Specify "ldev" (fixed). The information of LDEV belonging to the device group is used.
Specifies the name of device group (max. 32 characters) to be operated.
To operate an LDEV in the device group, specify the device name of LDEV (max. 32
characters) within the device group.
If the device name is omitted, all the LDEVs belonging in the device group are operated.
Specifies a user defined threshold value (20-95%).
If the specification is omitted, "80" is used.
When you add a pool volume, this option is ignored even if it is specified. If you want to
change the user defined threshold value of the additional pool volume, execute the raidcom
modify pool command.
100 1000000000 62500 1 375 70
raidcom get snap_pool 187