HP StorageWorks P9000 Reference Manual page 55

Option Description
-fc Displays copy operation progress, sidefile percentage, bitmap percentage, or Cnt Ac-J journal
percentage. Displays PFUL/PFUS for Continuous Access Asynchronous/Cnt Ac-J. Used to confirm
SSWS state as indication of S-VOL_SSUS-takeover after.
-fd Displays the relation between the Device_File and the paired volumes, based on the group (as defined
in the local instance configuration definition file). If Device_File column shows "Unknown" to either
the local or the remote HOST (instance) then it shows a volume which is not recognized on own
HOST, and pair operation are rejected (except the local option such as "-l") in protection mode.
Display example:
# pairdisplay -g oradb -fd Group PairVol(L/R) Device_File M
,Seq#,LDEV#.P/S,Status, Seq#,P-LDEV# M oradb oradev1(L) c0t3d0 0 35013
17..P-VOL COPY, 35013 18 - oradb oradev1(R) c0t3d1 0 35013 18..S-VOL
COPY, 35013 17 -
-fm Displays the Bitmap mode to output of M column.
-fe Displays the serial# and LDEV# of the external LUNs mapped to the LDEV and additional information
for the pair volume. This option displays the information above by adding to last column, and then
ignores the format of 80 column. This option is invalid if the cascade options (-m all,-m cas) are
specified.
Display example for Continuous Access Synchronous:
# pairdisplay -g horc0 -fdxe Group ... LDEV#.P/S,Status,Fence,Seq#,P-LDEV# M CTG JID AP EM
E-Seq# E-LDEV# horc0 ... 41.P-VOL PAIR ASYNC ,63528 40 - 0 - 2 - - - horc0 ... 40.S-VOL PAIR
ASYNC ,----- 41 - 0 - - - - -
Display example for Business Copy/Snapshot:
# pairdisplay -g horc0 -fe Group ... Seq#,LDEV#.P/S,Status, Seq#,P-LDEV# M CTG CM EM E-Seq#
E-LDEV# horc0 ... 63528 65.P-VOL COPY,63528 64 - - N - - - horc0 ... 63528 64.S-VOL COPY,-----
65 - - N - - -
CTG: For Continuous Access Synchronous/Cnt Ac-J, the CT group ID when the Fence is shown as
ASYNC. For Continuous Access Synchronous Sync CTG, displays the CT group ID when the Fence
is shown as DATA/STATUS/NEVER. For Business Copy, the CT group ID on at-time split volumes
using Business Copy.
JID: The journal ID for P-VOL or S-VOL. 'NOT Cnt Ac-J volume' is shown as '-'.
AP: The number of active paths for HORC links on P-VOL, and it displays the number of active paths
for Cnt Ac-J links on P-VOL and S-VOL.'Unknown'is shown as '-'. Refer to "MINAP" information that
is displayed by running the pairvolchk command.
CM: The Copy mode:
N: Non SnapShot
S: SnapShot. In the SMPL state, this shows that pair-volume is created as SnapShot.
C: Cruising Copy.
EM: The external connection mode:
H: Mapped E-lun as hidden from the host.
V: Mapped E-lun as visible to the host.
' - ': Unmapped to the E-lun.
BH: Mapped E-lun as hidden from the host, but LDEV blockading.
BV: Mapped E-lun as visible to the host, but LDEV blockading.
B: Unmapped to the E-lun, but LDEV blockading.
E-Seq#: The production (serial) number of the external LUN, 'Unknown' is shown as '-'.
E-LDEV#: The LDEV# of the external LUN, 'Unknown' is shown as '-'.
pairdisplay 55