Raidcom Reset Command_Status; Options And Parameters; Examples; Syntax - HP StorageWorks P9000 Reference Manual

Options and parameters

Option
[-time <time(sec)>]

Examples

Displaying error information of the asynchronous command.
# raidcom get command_statusHANDLE
64034
Description on each column in output example
HANDLE
The handle number which identifies the user uniquely.
SSB1
SSB1 error code. For more details about error codes, see HP StorageWorks P9000 RAID Manager
User Guide.
SSB2
SSB2 error code. For more details about error codes, see HP StorageWorks P9000 RAID Manager
User Guide.
ERR_CNT
The total number of errors that occur in this user handle.
Serial#
Serial Number.
Returned Value
Either of the following returned values is returned to exit (), which allows users to check the execution
results using a user program or a script.
0: Normal termination
1: One or more errors occurred.
Abnormal termination
EX_EWSTOT : Timeout while waiting the result of the command execution

raidcom reset command_status

Resets the error information of the configuration setting command, which is stored in the DKC and
executed asynchronously (Asynchronous command).

Syntax

raidcom reset command_status
Options and parameters
None
Examples
Resetting the error information of the asynchronous command.
# raidcom reset command_status
Description
Specifies waiting time to complete the process of asynchronous command.
If the specification of parameter is omitted, the default waiting time (CMD_DEF_TMOUT: 7200
sec.) is set.
SSB1 SSB2 ERR_CNT Serial#00c5
raidcom reset command_status 195
- - 0