Raidcom Get Rcu; Examples; Syntax; Options And Parameters - HP StorageWorks P9000 Reference Manual

Examples

Deleting the P9500 for which the product number; 64034, the RAID type: P9500 and the path
group ID: 1 are set.
raidcom delete rcu -cu_free 64034 R700 1

raidcom get rcu

Displays MCU/RCU information.

Syntax

raidcom get rcu [-cu_free <serial#> <id> <pid>]

Options and parameters

Option
[-cu_free <serial#><id><pid>]
Examples
Displaying RCU information.
# raidcom get rcu
Serial# ID PID MCU RCU M/R T STS MP NP IM FZ RTO(s) RTT(ms)
64034 R7 - 1C 23 RCU F NML 4 8 MR D 15 20
64034 R7 - 1C 23 RCU F NML 4 8 RO E 15 20
64034 R7 1 - - MCU E NML 4 8 - - 15 20
Description on each column in output example
-Serial#
Product serial number.
-ID
This displays the ID for identifying RAID type.
XP12000 Disk Array/XP10000 Disk Array : R5, XP24000/XP20000 Disk Array : R6, P9500 :
R7
PID
This displays a path group ID.
If CU is specified for RCU, "-" is displayed.
-MCU
This displays the CU number (hexadecimal) as MCU.
If CU is specified for RCU, "-" is displayed.
-RCU
This displays the CU number (hexadecimal) as RCU.
If CU is specified for RCU, "-" is displayed.
-M/R
This displays the CU type as MCU/RCU.
180 Configuration setting commands
Description
-cu_free <serial#> <id> <pid>
This parameter is used to specify CU free that is specified by Serial#, id#, pid#.
< id > is used to set RAID Type, and it can be specified in the following strings.
XP12000 Disk Array/XP10000 Disk Array:R500, XP24000/XP20000 Disk
Array:R600, P9500:R700
<pid> is used to set the path group ID (0-255).