Rcu Operations List When "Mcu&Rcu" Is Selected; When Ldkc, A Cu Group, Or Cu Is Selected In Tree - HP StorageWorks P9000 User Manual

RCU Operations list when "MCU&RCU" is selected
List field descriptions when MCU&RCU is selected in the Display box are shown below. The fields
vary according to the selections you make in the tree:
"When LDKC, a CU group, or CU is selected in tree" (page 96)
"When an MCU or RCU is selected in tree" (page 97)

When LDKC, a CU group, or CU is selected in tree

The following columns appear in the list area when MCU&RCU is selected in Display, and an
LDKC, CU group, or CU is selected in the tree.
Item
CU
Type
S/N
ID
Paired CU
M-R Path
96 Continuous Access Synchronous GUI reference
Description
CU number selected on the tree. If you select CU Free, "Any" is displayed.
Displays whether the paired system is an MCU or RCU. This depends on whether the system
and CU you accessed in Remote Web Console is a primary or secondary system. For example,
if you accessed a primary system (MCU), then Type will show RCU, a secondary system, and
vice versa.
Serial number of the paired CU (five digits). The LDKC number (two digits) displays next to
the S/N.
ID of the paired CU.
If your tree selection is from the CU Free grouping, the Path group ID is displayed in a
two-digit hexadecimal number with an asterisk, or in "Default." Path group IDs are used
for identifying groups of logical paths.
If your tree selection is from a CU grouping (not CU Free), the SSID is displayed in a
four-digit hexadecimal number.
CU number of the paired CU. If you select CU Free, "Any" is displayed.
Path channel type (fibre) between the CU in the local system and paired CU. This column is
blank when the local CU is an MCU.