Thin Provisioning
The following table provides information about specific Thin Provisioning conditions that must be
observed when using Resource Partition.
Operation name
Create LDEVs
Delete LDEVs
Create pools
Expand pools
Edit pools
Delete pools
Expand V-VOLs
Reclaim zero pages
Stop reclaiming zero pages
DKA Encryption
The following table provides information about specific DKA Encryption conditions that must be
observed when using Resource Partition.
Operation name
Edit encryption keys
LUN Manager
The following table provides information about specific LUN Manager conditions that must be
observed when using Resource Partition.
Operation name
Add LUN paths
36
Configuring resource groups
Condition
If THP V-VOLs are created, the following must be assigned to the Storage
Administrator group that is permitted to manage them.
LDEV ID
Pool VOL of the pool
If THP V-VOLs are deleted, the following must be assigned to the Storage
Administrator group that is permitted to manage them.
LDEV ID
Pool-VOL of the pool
Volumes to be specified as pool-VOLs must be assigned to the Storage Administrator
group permitted to manage them.
All the volumes that are specified when creating a pool must belong to the same
resource group.
Pool-VOLs of the specified pool must be assigned to the Storage Administrator
group permitted to manage them.
You can expand only the THP V-VOLs that are assigned to the Storage Administrator
group permitted to manage them.
You can reclaim or stop reclaiming zero pages only for the THP V-VOLs that are
assigned to the Storage Administrator group permitted to manage them.
Condition
When you specify a parity group and open the Edit Encryption window, the
specified parity group and LDEVs belonging to the parity group must be assigned
to the Storage Administrator group permitted to manage them.
When you open the Edit Encryption window without specifying a parity group,
more than one parity group and LDEVs belonging to the parity group must be
assigned to the Storage Administrator group permitted to manage them.
Condition
When you specify host groups and open the Add LUN Paths window, the specified
host groups must be assigned to the Storage Administrator group permitted to
manage them.